The Taprite Regulators help to maintain better pressure when the tank gets low. Some regulators have a very hard time maintaining accurate pressure when the co2 tank begins to get low, but the Taprite regulator is the best at this! Your kegs will always be under the exact pressure that you want, even when your CO2 tank is low.

Most Taprite regulators for soft drink dispenser come with barb outlets for use with tubing. Other fittings are available for easy use at both commercial and homebrew. The majority of these regulators are designed to dispense in numerous ranges of models with a dispense available for use with, beer gas, and specialty brews.

Let’s go through the importance of Taprite Regulators in the Soft Drink Industry:

1. Taprite manufactures a variety of regulators for soft drink dispense systems and setups. Our models with high performance are designed to provide maximum gas flow without freeze up. All Taprite regulators for soft drink dispense are designed to work in the 0-120psi range.

2. Primarily Taprite regulators reduce and control compressed gases CO2 and N2.

3. These regulators are also used as control devices that reduce the high pressure in gas being dispensed from the compressed gas cylinder as a source to the safe, useable pressure required for common applications.

4. Taprite primary regulators are also designed and approved for use with bulk gas dispense. These regulators are connected to the gas source using fittings specifically designed for both the regulator and source.

5. Sometimes with some duly rated fittings of pressure hose etc. the Taprite allows remorse mounting & dispense.

6. Taprite primary regulators also feature two Bourdon Type pressure gauges. The one gauge indicates the pressure being delivered through the regulator’s output port. And the other gives a reading of the pressure in the compressed gas cylinder.

7. Secondary regulators are created in a way to further reduce the gas pressure after its output through the primary regulator. It is dependent on the type of beverage being served.

8. Taprite Secondary regulators feature a single Bourdon gauge to indicate final output pressure. & when joined together they allow greater dispense capacity and multiple set pressures.

9. Taprite’s product line displays regulators with polycarbonate bonnets and zinc bonnets, which are resilient and easy to use. It is featured on the vast majority of regulators produced for commercial, CO2 applications as Soft drink Equipment Spare Parts. It is approved to handle a maximum inlet pressure of 950psi.

10. Zinc bonnet regulators in common use with N₂ are designed and approved to handle a maximum inlet pressure of 2200psi.

11. With low pressure of Taprite Regulator, we can control the release of gas if the out pressure exceeds.

12. All Taprite regulator fittings are sized to match the hose diameter & the barb is designed for use with the hose, it is important to know whether or not your outlet fittings contain check valves. To prevent the backflow of liquid into your regulator, you can use Check valves in outlet fittings.

13. Taprite Regulators are one of the important systems in the Restaurant Equipment Spare Parts to control & maintain the pressure of the soft drink dispense system.

Are you looking for Soft drink Equipment Spare Parts? NATRON is the strategic partner of branded companies in the soft drinks sector, such as Pepsi and Coca-Cola, to co-engineer their innovative projects.